Dhruv Metals supplies Carbon Steel AISI 1045 Bars and Rods, a medium-carbon steel grade that offers higher strength and hardness compared to lower carbon grades while maintaining good machinability. These bars undergo strict quality control to comply with ASTM and other equivalent standards, ensuring strong mechanical performance. AISI 1045 steel bars are available in hot-rolled or cold-finished conditions, and come in different profiles including round and hex bars. With controlled chemistry and tight dimensional tolerances, these bars are ideal for applications that require high fatigue strength and moderate impact resistance.
Carbon Steel AISI 1045 contains about 0.43–0.50% carbon and 0.60–0.90% manganese, along with small amounts of phosphorus and sulfur. The tensile strength of AISI 1045 ranges from 570 to 740 MPa, with a yield strength of about 310 MPa and elongation of roughly 16%. This steel grade can be heat treated and hardened through quenching and tempering to improve wear resistance. It also provides better machinability than higher alloyed steels while maintaining uniform strength and hardness.
| Specifications | : | AISI 1045, ASME SA1045 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Carbon Steel AISI 1045 Round Bars | : | 100mm-1200mm |
| Finish | : | Bright, Polish & Black |
| Length | : | 12m |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Grade | Mn | S | C | P | Si | Cr | Ni |
| AISI 1045 | 0.5-0.8 | 0.035 | 0.5-0.42 | 0.035 | 0.17-0.37 | 0.25 | 0.3 |
| Grades | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| AISI 1045 | 600 | 40 | 355 | 229 |
| STANDARD | WERKSTOFF NR. | UNS |
| AISI 1045 | 1.1191 | G10450 |
They offer high strength, excellent toughness, and wear resistance, making them ideal for heavy-duty applications.
Commonly used in automotive, machinery, and structural applications, including shafts, gears, and hydraulic rods.
These bars are frequently used in mechanical components like crankshafts, axles, shafts, couplings, and bolts. They are widely applied in the automotive, agricultural, and machinery industries, where moderate to high strength is necessary. AISI 1045 is also suitable for gear blanks, base plates, and hydraulic parts. Due to its strength and machinability, this grade is often selected for components subjected to high stress or dynamic loading.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Dhruv Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Hyderabad , India
Copyright 2024 Dhruv Metals. All rights reserved
